Bemis Post Puller

Available in 2 Models:

PPF 103 Regular Duty

• Requires 3/4 ton or heavier truck.

• 10,000 lb. of pulling power with a 91.5” reach from pivot point.
• Note: PPF103 with 12v pump is not appropriate for over 25% duty cycle.
• The puller can be supplied without the electric hydraulic pump for mounting on vehicles that would have another suitable hydraulic power source available. (recommended for high duty cycles). This is the Model PPF103X.
• 10,000 lb. jaw set included.
• Approximate total weight added to vehicle is approximately 300 lb.
• Shipping weight approximately 450 lb.

AVAILABLE WITH POWER UNIT (PPF103) or WITHOUT POWER UNIT (PPF103X)

PPF195 Heavy Duty

• Requires a 17,500 GVW vehicle with a hydraulic system of 4-6 GPM @ 2,500 PSI.
• Posts gripped for pulling with chains of suitable working load strength (31,000 lb. or greater).
• 30,000 lb. of pulling power with a 119” reach from pivot point.
• Installed weight approximately 425 lb.
• Shipping weight 700 lb.
• JAW SET IS NOT INCLUDED, but may be purchased as optional equipment for use for maximum capacity of 3 1/4” diameter poles or 3 1/2” rectangle posts.

DELIVERY SCHEDULE TYPICALLY 30-45 DAYS FROM ORDER DATE.

JAW SET

• Standard equipment with Regular Duty Models PPF103 and PPF103X.
• Optional equipment with Heavy Duty Model PPF195.
• Jaws consist of two symmetrical halves that allow quick attachment without having to be slipped over the top of the post.
• Clamping edges are hardened steel to prevent slippage and excessive wear.
• Maximum capacity is 3 1/4” pole or 3 1/2” rectangle post.